Cut Sheet
Utility Cabinets
Type 1 Telephone Cabinets
Data Sheet
Application
• Houses electrical controls and instruments
• Used as wiring boxes, junction boxes, pull boxes,
telephone and communication cable termination and
spare fuse cabinet
• Protects against contact with enclosed equipment
Standards
• UL 50 listed, Type 1
• CSA C22.2 No. 40 certified, Type 1
• Conforms to NEMA standard for Type 1
Finish
• Wash and phosphate undercoat
• ANSI 61 gray acrylic electrocoat finish
Accessories
• Locks and latches
• Ground lug kit
• Terminal blocks
• Wood back boards, barriers and shelves
• Touch-up paint
• See Accessories section
Construction
• Cabinet and trim covers are fabricated from code gauge steel,
(see page 80)
• Cabinet body has mounting holes on the back
• Knockouts on sides, top and bottom ends are standard on
cabinets 24 inches wide or smaller, (see Type 1 Screw Cover
Enclosures for knockout configuration) (see pages 50 - 53)
• Cabinets are available without knockouts
• Surface or flush mounting
• Doors have either a continuous or heavy-duty butt hinge
• Double-door construction on trim covers fitting cabinets when
wider than 24 inches
• Tumbler lock with key furnished on single-door trim cover
less than 48 inches high
• T-handle 3-pt lock with key furnished on 48” high single-door
and all double-door trim covers
• Directory card holder on all trim covers wider than 18 inches
• Trim covers can be ordered separately and used with Type 1
Screw Cover Enclosures, (see page 80)
• Cupped washer and bright finish oval head screw used to
protect trim cover finish and improve appearance
Discount Schedule: A2
Subclass: AQ0
Flush Mount
Surface Mount
Type 1, 3, & 3R Enclosures
Notes: We can provide special sizes, finishes and other modifications. Consult the factory for your special requirements.
78
Type 1, 3, & 3R Enclosures
B-Line series electrical enclosuresEaton