Cut Sheet

Lay-In Wireway
Type 1 Screw Cover - Painted & Galvanized
Illustration Sheet and Catalog Number Subclass: Painted - AK1 & Galvanized - Z40
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Cable & Wire Management
Reducer
Catalog Number
AB C
Painted Galvanized
in. mm in. mm in. mm
2233 FR -- 2.50 64 3.00 76 6.00 152
3344 FR
-- 3.00 76 4.00 102 8.00 203
4466 FR
-- 4.00 102 6.00 152 10.00 254
6688 FR
-- 6.00 152 8.00 203 12.00 305
881010 FR
-- 8.00 203 10.00 254 12.00 305
10101212 FR
-- 10.00 254 12.00 305 16.00 406
Barrier, Bolt-On
For those installations that require separated wiring
compartments.
Reducer
B dimensions (see catalog table), correspond to the large
end opening. Used to reduce or enlarge wireway runs.
C
A
B
A
60.00
(1524)
H
.
875
(22)
.
875
(22)
Barrier Kit, 60” Bolt-On
Catalog Number Size Length H
Painted in. mm in. mm in. mm
22-12BK* 2.50 x 2.50 64 x 64 60.00 1524 1.88 48
33-12BK* 3.00 x 3.00 76 x 76 60.00 1524 2.25 57
44-12BK* 4.00 x 4.00 102 x 102 60.00 1524 3.00 76
66-12BK* 6.00 x 6.00 152 x 152 60.00 1524 4.50 114
88-12BK* 8.00 x 8.00 203 x 203 60.00 1524 6.00 152
1010-12BK* 10.00 x 10.00 254 x 254 60.00 1524 8.00 203
1212-12BK* 12.00 x 12.00 305 x 305 60.00 1524 10.50 267
*Not UL or CSA listed fitting.
B
A
C
Wireway Hanger
Catalog Number GH JK
Painted Galvanized in. mm in. mm in. mm in. mm
22 FH -- 8.50 216 6.50 165 6.50 165 2.87 73
33 FH -- 10.50 267 8.50 216 9.00 229 3.87 98
44 FH -- 12.50 318 10.50 267 10.37 263 4.87 124
66 FH -- 16.50 419 14.50 368 13.50 343 5.87 149
88 FH -- 20.50 521 18.50 470 16.75 425 6.87 174
1010 FH* -- 24.50 622 22.50 572 19.75 502 7.87 200
1212 FH* -- 28.50 724 26.50 673 22.75 578 8.87 225
*Hangers are shipped welded in the top cover assembly position.
90° Elbow - Tee - Cross
Catalog Number ABC
Painted Galvanized in. mm in. mm in. mm
22 LTX 22 LTXGV 2.50 64 2.50 64 4.50 114
33 LTX -- 3.00 76 3.00 76 5.00 127
44 LTX 44 LTXGV 4.00 102 4.00 102 6.00 152
64 LTX -- 6.00 152 4.00 102 8.00 203
66 LTX 66 LTXGV 6.00 152 6.00 152 8.00 203
88 LTX 88 LTXGV 8.00 203 8.00 203 10.00 254
1010 LTX 1010 LTXGV 10.00 254 10.00 254 12.00 305
1212 LTX 1212 LTXGV 12.00 305 12.00 305 14.00 356
Top Cover Assembly
For those installations where the
wireway cover must be removed
from the top.
Wireway Hangers
(shipped
unassembled)*
J
K
G
K
G
∅ .25
∅ .45
H
Side Cover Assembly
For those installations where the
wireway cover must be removed
from the side.
90° Elbow-Tee-Cross
Designed for left or right
90° turns or as a tee or
cross by removing closure
plates. Includes two (2)
closure plates and
hardware.
C
C
A
B
12
Cable & Wire Management
B-Line series electrical enclosuresEaton