Cut Sheet
Lay-In Wireway
Type 1 Screw Cover - Painted & Galvanized
Illustration Sheet and Catalog Number Subclass: Painted - AK1 & Galvanized - Z40
Wireway Catalog Number Wireway Size Knockout
Quantity
Painted Galvanized Height x Depth x Length
Ax B x C
D
KO No KO KO No KO
in. mm in. mm Gauge Top Bottom
101012 G 101012 G NK -- 101012 GGV NK 10.00 x 10.00 x 12.00 254 x 254 x 305 8.00 203 14 33
101024 G 101024 G NK -- 101024 GGV NK 10.00 x 10.00 x 24.00 254 x 254 x 610 8.00 203 14 77
101036 G 101036 G NK -- 101036 GGV NK 10.00 x 10.00 x 36.00 254 x 254 x 914 8.00 203 14 11 11
101048 G 101048 G NK -- 101048 GGV NK 10.00 x 10.00 x 48.00 254 x 254 x 1219 8.00 203 14 15 15
101060 G 101060 G NK -- 101060 GGV NK 10.00 x 10.00 x 60.00 254 x 254 x 1524 8.00 203 14 19 19
101072 G 101072 G NK -- 101072 GGV NK 10.00 x 10.00 x 72.00 254 x 254 x 1829 8.00 203 14 23 23
1010120 G 1010120 G NK -- 1010120 GGV NK 10.00 x 10.00 x 120.00 254 x 254 x 3048 8.00 203 14 39 39
121212 G 121212 G NK -- 121212 GGV NK 12.00 x 12.00 x 12.00 305 x 305 x 305 10.00 254 14 33
121224 G 121224 G NK -- 121224 GGV NK 12.00 x 12.00 x 24.00 305 x 305 x 610 10.00 254 14 77
121236 G 121236 G NK -- 121236 GGV NK 12.00 x 12.00 x 36.00 305 x 305 x 914 10.00 254 14 11 11
121248 G 121248 G NK -- 121248 GGV NK 12.00 x 12.00 x 48.00 305 x 305 x 1219 10.00 254 14 15 15
121260 G 121260 G NK -- 121260 GGV NK 12.00 x 12.00 x 60.00 305 x 305 x 1524 10.00 254 14 19 19
121272 G 121272 G NK -- 121272 GGV NK 12.00 x 12.00 x 72.00 305 x 305 x 1829 10.00 254 14 23 23
1212120 G 1212120 G NK -- 1212120 GGV NK 12.00 x 12.00 x 120.00 305 x 305 x 3048 10.00 254 14 39 39
Notes: Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.
Cable & Wire Management
3.00
(76)
typ.
spacing
3.00
(76)
typ.
spacing
Wireway Side
3.00
(76)
B
1.25
(32)
1.56
(40)
JJJ
H
H
Knockout sizes:
H =
3
/4” or
1
/2” conduit
J = 1
1
/4” or 1” conduit
H
mounting hole
cover screw
Wireway Cover
C-4.00
(102)
C
A
D
Note: 2.50” x 2.50” wireway has
1
/2” and
3
/4” 2-way knockouts
only, 3” (76 mm) from ends and 3” (76 mm) on center.
Additional mounting holes are furnished when C dimension is
over 60.00" (1524 mm).
Wireway Section
Lengths from 12.00” (305 mm)
to 120.00” (3048 mm).
Wireway exceeding 72.00”
(1829 mm) has two covers.
Shown with KO’s, also
available without.
10
Cable & Wire Management
B-Line series electrical enclosuresEaton