Instruction manual

4
WARNING
Welding and cutting is dangerous to the operator, people in or near the working
area, and the surrounding, if the equipment is not correctly operated. Therefore,
the performance of welding/cutting must only be under the strict and
comprehensive observance of all relevant safety regulations. Please read and
understand this instruction manual carefully before the installation and
operation.
• The switching of function modes is possibly damaging to the equipment, while
the welding operation is performed.
• Do disconnect the electrode-holder cable with the equipment, before the
performance of welding.
• A safety switch is necessary to prevent the equipment from electric-leakage.
• Welding tools should be of high quality.
• Operators should be qualified.
Electric Shock: It may be fatal
• connect the earth cable according to standard
regulation.
• Avoid all contact with live components of the
welding circuit, electrodes and wires with bare
hands. It is necessary for the operator to wear dry
welding gloves while he performs the welding task.
• The operator should keep the working piece insulating from himself/herself.
Smoke and Gas generated wile welding or cutting:
harmful to people’s health.
• Avoid of breathing the smoke and gas of welding or
cutting.
• Keep the working area in good ventilation.
Arc light-emission: harmful to people’s eyes and
skin
• Wear the welding helmet, anti-radiation glass and
work clothes while the welding operation is
performed.
• Measures also should be taken to protect people in
or near the working area.
Fire hazard
• The welding splash may cause fire, thus remove
flammable material away from the working place.
• Have a fire extinguisher nearby, and have a train fire
person ready to use it.
Noise: Possibly harmful to peoples’ hearing.
• Surface noise is generated while welding/cutting,
the hearing aids is necessary in some cases.
Machine Fault:
• Consult this instruction manual.
• Contact your local dealer or supplier for further
advice.