Instruction manual

DEPARTMENT OF THE NAVY
NAVAL SEA SYSTEMS COMMAND
WASHINGTON, D.C. 20362
NAVSEA S0300-BB-MAN-010 0910-LP-111-3301
U.S. NAVY UNDERWATER CUTTING & WELDING MANUAL CHANGE B
1 June 2002
PUBLISHED BY DIRECTION OF
COMMANDER, NAVAL SEA SYSTEMS COMMAND
NAVSEA S0300-BB-MAN-010 is changed as follows:
1. Remove old pages and insert new pages as indicated in instruction below. Dispose of super-
seded pages in accordance with applicable regulations.
2. New or changed material is indicated by a vertical bar in the margin of the page.
After the attached enclosures have been inserted, record this CHANGE on the Record of Changes
sheet and insert this page behind the Title page.
Request for additional copies of this CHANGE shall be submitted to Commanding Officer, Naval
Publications and Form Center, 5801 Tabor Avenue, Philadelphia, PA 19120-5099.
CHANGE INSTRUCTIONS
SHEET 1 OF 1
REMOVE PAGES INSERT PAGES
TITLE AND A TITLE AND A
CERT SHEET CERT SHEET
iv iv
ix ix
1-2 1-2
2-33 through 2-36 2-33 through 2-36
4-30 4-30
Index-1 Index-1