Specifications

8
The assembly of the consumables is as pictured. The electrode is inserted in first, then
seat the ring on the electrode. The copper tip should be placed on the ring and it
should seat well and flat. Last you will secure all parts in place by turning the ceramic
cup clockwise until it is snug. Do not over tighten.
Assembly of the Torch Consumables
EasyCut 6O/100
The assembly of the consumables for the cut60 and other larger models is as pictured.
The electrode is inserted in first and tightened with pliers very snug, then seat the ring
on the electrode. The tip should be placed on the ring and it should seat well and flat.
Last you will secure all parts in place by turning the ceramic cup clockwise until it is
snug. Do not over tighten.
Shield Cup
Copper Tip
Electrode
Torch Head Ceramic Ring