Specifications

3
Safety tips
● With the machine in use, do not switch the machine off or it
will damage the internal circuitry.
● Make sure your circuit breaker can handle the required
amperage draw of your machine.
● Use a UL approved outlet/receptacle and plug with your
machine, do not hard wire the machine to main power.
● Use safety goggles designed to darken the arc generated by
your machine.
Electric-shock
•Machine should be grounded via the power cord or ground on machine case.
•No touching electric parts with bare hands, wet hands or wet clothes.
•Do not operate machine with bare feet or on a wet floor.
•Make sure the work area is free of flammable and explosive chemicals.
Smoke—may be harmful to your health.
•Keep your head out of the smoke.
•When welding, make sure the air is flowing away to avoid breathing in the
smoke.
Arc-emission---may be harmful to your eyes and skin
•Wear suitable welding mask and clothes to protect your eyes and skin.
•Use suitable screen or curtain to keep the passers by from viewing the
emission.
•The arc spray and metal spray from machine use may cause nearby fires. Use
caution.
Noises—too much noise may be harmful to your hearing.
•Please wear something to protect your ears from the noises.
Break-down: ask the professional for help
•If you have any problems in setting up or operating, please first consult this
manual.