Owner`s manual

FIG. 5- To adjust the height of the glide handles, loosen ratchet clamps. Adjust the handles to the
user’s desired position and tighten the clamps securely.
The resistance cylinders are individually adjustable to provide twelve different resistance settings. Turn
the cap of the cylinders to the desired resistance. The resistance cylinders can also be disconnected
by disengaging the pull pin.
FIG. 6- Adjust the foot plates by loosening the two knobs on each foot plate (for easier access to the
inside knob, swing the leg assembly forward), so the user’s knees are centered in the knee pads and
the femur is resting on the seat. Tighten securely.
Caution: Never reposition the foot plates while a user is in the standing position.
Caution: Avoid placing fingers in the adjustment slot.
FIG. 7- Often, proper fit can be achieved by adjusting the foot plate height. When necessary, the knee
pads are independently adjustable with five adjustments. To adjust the knee pads, remove the bolts
from the knee pads and adjust to the desired position. Replace the bolts and tighten securely.
FIG. 8- Before transferring, flip up the knee pads to allow easier access.
Caution: Never make adjustments to the EasyStand while a user is in the standing position.
Caution: While using the Glider, advise bystanders to keep hands and feet clear of the Glider
mechanism.
Caution: While using the Glider, keep hands clear of the resistance cylinders’ upper and lower
mounting points.
FIG. 5
FIG. 7
Adjustments
FIG. 8
!
!
!
FIG. 6
Adjustments - Page 4
!
!