Owner`s manual

13
Pull up slightly on the cylinder pin
and align it with the hole on the
kneepad tube. Insert the pin completely
through the tube.
14
If you ordered the table option,
remove the grab bar/front pad bracket
and insert the table sleeve. Replace the
standard knob with the longer studded
knob, be sure the slot lines up with the
tightening knob.
15
Remove the glide handles and
insert the table with frontpad into the
bracket. If desired, re-insert glide
handles.
Tighten securely.
Note: Engage resistance cylinders
and turn to maximum resistance to
reduce unwanted leg motion.
page 7
assembly