Owner`s manual

1
Carefully remove the packaging to
reveal your partially assembled Glider.
Note: Some overseas shipments
require additional assembly such as
attaching the two base bars on the
bottom of the unit. The angled bar
attaches to the rear, casters toward
the front.
2
For shipping reasons, the seat depth
button will not be visible when you
receive your Glider. Loosen the knob
on the seat depth adjustment tube and
pull up on the back until the seat
button clicks into the blue ring.
Depress the button and continue this
process until you reach the green ring.
3
Slide the round follow tube from the
seat into the follow tube on the base.
Continue until you hear the spring
button click. Both buttons should be
in the green ring at this time.
Assembly
page 3
assembly