Owner`s manual

page 2
safety precautions
• The EasyStand 6000 is designed to accommodate individuals from 5'4" to 6'5"
and up to 280 lbs. If you do not fit these specifications, Altimate Medical Inc.
does not recommend the use of the EasyStand 6000.
• Be sure that all nuts and bolts are tightened securely. Check your EasyStand
periodically to make sure everything is secure. A set of hex key wrenches is
included.
• Altimate Medical Inc. recommends that you consult with a qualified therapist or
physician prior to starting a standing program.
• Place your EasyStand 6000 on a sturdy, level surface.
• Use the EasyStand indoors only.
TRANSFERRING:
• For proper transfer techniques, please seek professional advice from your therapist
or doctor before transferring.
• Always lock the wheel locks on your wheelchair before transferring.
• If you do not need assistance in transferring, position your wheelchair next to the
EasyStand and flip the swing arm back. Slide over to the seat using the grab bars
and position your feet in the foot plates. Secure the velcro calf straps and flip the
swing away arms down.
• When transferring out of the EasyStand, pump the seat up so that it is equal to or
higher than the seat you are transferring back into.
POSITIONING:
• Consult with your therapist for proper adjustments.
• Adjust the knee support in the seated position only.
• When in the standing position, the front pad should support your upper body and
the top of the glide handles should be shoulder height.
STANDING:
• Please consult with your therapist or doctor before starting a standing
program.
Safety Precautions