Owner`s manual

page 8
assembly
16
If you ordered the Glider with a
high back extension, it will be pre-
installed.
If you order the high back extension
later, install it by removing the back
and the caps. Slide the high back into
the back tubes (you may have to tap
with a rubber hammer). Replace the
bolts.
Tighten securely.
17
If you ordered the Glider with a
Roho® seat, it will be pre-installed.
To replace your present seat with a
Roho® seat, pump the seat to the
standing position, remove the bolts,
and install the new seat.
Tighten securely.