Owner`s manual

page 27

Adjusting Your Evolv

Foot Plates

Caution: Never reposition the foot plates while a

user is in the standing position.

FIG. G- Loosen the clamp connecting the foot

bracket to the seat post to adjust the foot plate

height and plantar/dorsi.

Position the height of the foot bracket so the

user’s knee is as close to the seat pivot as

possible. The femur should be resting on the seat,

at a slight downward angle.

ighten the clamp securely.

Caution: Avoid placing fingers in the adjustment

slot.

FIG. H- The foot plates can be abducted in 4

different positions (toe out), by removing the bolt

underneath the front edge of the foot plate with a

hex wrench and lifting up and turning the

foot plate. Make sure the foot plate notch is

positioned in one of the four slots.* Place the bolt

back into the foot plate once t

he desired position

is reached.

*Available on the Evolv E3 if ordered with

multi-adjustable foot plates.

FIG. G

Adjusting Your EasyStand Evolv

Kneepad

FIG. I- To adjust the kneepad depth, loosen the

ratchet handle and move into position.Tighten

ratchet handle when you reach the desired

position.

Position the kneepad so the user’s knee is

centered in the kneepad and only 2 fingers fit be-

tween the back of the leg and the seat.

FIG. I

FIG. H