Owner`s manual

page 18
Option Assembly
Removable Back Option
PNG50171, PNG50172,
PNG50173, PNG50174
To attach the Removable Back to the
unit, slide the back assembly into the
seat assembly as shown. Insert
hardware into back tubes with tabs
facing upward and toward the back.
Tighten securely with knobs provided.
NOTE: Make sure
hardware is placed
into back as shown.
Back Option
PNG50062, PNG50066,
PNG50067, PNG50068
To assemble your back option, slide
the back assembly into the seat as-
sembly as shown. Tighten securely
with bolts provided, then add the
swing-away arms. Remove the nut
from the arm. Place the arm onto the
unit keeping the arm assembly to-
gether. Place nut onto bolt on the in-
side of the unit. Tighten securely.
Option Assembly