Owner`s manual

page 14
Glider Adjustments
FIG. A- To adjust the height of the glide handles, loosen ratchet clamps. Adjust the
handles to the user’s desired position and tighten the clamps securely.
The resistance cylinders are individually adjustable to provide eleven different
resistance settings. Turn the cap of the cylinders to your desired resistance. The
resistance cylinders can also be disconnected by disengaging the pull pin.
FIG. B- Adjust the foot plates by loosening the two knobs on each foot plate (for easier ac-
cess to the inside knob, swing the leg assembly forward), so the user's knees are
centered in the kneepads and the femur is resting on the seat. Tighten securely.
FIG. C- Often, proper fit can be achieved by adjusting the foot plate height. When
necessary, the kneepads are independently adjustable with five adjustments. To adjust the
kneepads, remove the hex key bolts from the kneepads and adjust to the desired position.
Replace the bolts and tighten securely.
FIG. D- Before transferring, flip up the kneepads to allow easier access.
Caution: Never make adjustments to the EasyStand while a user is in the standing
position.
Caution: While using the Glider, advise bystanders to keep hands and feet clear of the
Glider mechanism.
Caution: While using the Glider, keep hands clear of the resistance cylinders' upper and
lower mounting points.
FIG. A
FIG. B
FIG. C
EasyStand Glider Adjustments
FIG. D
!
!
!
®
®