Owner`s manual

page 13

Glider Assembly

EasyStand Glider Assembly

FIG. 25

FIG. 24

FIG. 24- For International orders only: Place the front

frame and the seat assembly on its side, slide the front

frame into the opening of the seat assembly as shown.

Line up holes and insert all four bolts first, then place

nuts onto bolts and tighten securely with hex wrench

and 19mm open-ended wrench. Place unit upright on its

wheels.

FIG. 25- Remove the ratchet handles and bolts from the

lide handles, slide the glide handles into the slots.

Tighten securely. If you ordered any additional options,

please refer to the drawings on pp. 18-26. Install the seat

onto the seat assembly after all other options are added.

Front Frame

Seat Assembly