Owner`s manual

page 8
Swing-Away Front Assembly
FIG. 7- Insert the H-frame into the front caster frame. Insert
pins into the holes provided (crossbar should face seat).
If you ordered Front Swivel Casters refer to p. 24.
If you ordered Independent Kneepads refer to p. 25.
FIG. 8- Place the kneepad bracket onto the H-frame. Remove
the three bolts from the kneepad making sure the plastic in-
sert stays in place. Place the kneepad onto the bracket and in-
s
ert the top two bolts before inserting the middle bolt. Tighten
securely.
If you ordered the Shadow Tray, skip to p. 9.
FIG. 9- Insert the tray frame into the H-frame, tighten knobs
securely. Place the tray onto the tray frame, install knobs.
Tighten nuts securely,
Note: Tray will not move if nuts are overtightened.
To use the Swing-Away Front:
To swing away the front for transferring, remove pull pins f
rom
the bottom of the H-frame. Lift collar and swing away for
transfer. After positioning client in stander, swing front back
into front caster frame and replace pins, making sure the col-
lar is secure.
Caution: Collar and pins must be securely in place before the
user transitions into the standing position.
For Evolv adjustments, see p. 27.
FIG. 8
FIG. 9
!