Owner`s manual
Shadow Adjustments
page 9 page 30
Shadow Tray Assembly Shadow Tray Adjustments
FIG. A- To adjust chest pad height, loosen knob and move to desired position.
Tighten securely.
FIG. B- To adjust the depth of the front pad and tray, loosen the knob located below
the tray. Move the front pad to the user’s desired position and tighten the knob. To
flip the tray up, pull out and twist the locking mechanism and lift. To adjust the level
of the support arm use the set screw to set to the desired position.
Caution: After flipping the tray up, be certain to put the locking mechanism back into
place. Failure to do so can cause the tray to fall suddenly.
Caution: Avoid placing fingers near the tray tubes and chest height adjustment slots.
FIG. A
Chest Pad Height Adjustment
FIG. B
Tray Depth Adjustment
Locking Mechanism
Support
Arm
!
!
Set Screw
®