Owner`s manual

page 4

Basic Unit Assembly-Evolv

FIG. 1

FIG. 2

FIG. 3

Front Column

Main Frame

Note: Bolts are currently in proper location.

FIG. 1- Attach the axle weldment to the front column with bolts

and tighten securely.

FIG. 2- Attach the casters to the rear of the base, lock the

casters and hand tighten, do not overtighten.

Slide the front column into the opening of the main frame as

shown. Install the four bolts into the holes. Do not

tighten securely until all bolts are started.

Flip down footplates and insert quick adjust handles. Tighten

securely.

FIG. 3- Attach the pump handle onto the pump on the main

frame with bolts and tighten securely. Insert top of handle into

pump handle and tighten securely.