Owner`s manual

page 25 p
Perfect Fit Guide
Proper positioning is needed to obtain optimum standing posture.
Measure client for approximate seat depth (A)
and footplate (B) settings.
step one
step two
step three
To adjust seat depth, loosen the two ratchet
handles under the seat (C). Depress the snap
button on the adjustment tube while moving the
back (D). Tighten the ratchet handles after
adjusting.
(C)
(D)
After achieving your desired seat depth, rotate
the back angle adjustment knob (E) so the
increment indicator (F) is
in the green (safe) area.
(B)
(A)
(F) (E)
Perfect Fit Guide
step five
step six
Position the user’s hips as close
as possible to stander’s hip
pivot (I & J).
(I) improper (J) proper
step four
Loosen the ratchet handles on the footplates to
adjust height and plantar/dorsi (G). Client’s knee
should be slightly lower than the hip (H). Tighten
ratchet handles after positioning.
(G) (H)
To determine correct positioning, you should be
able to fit two fingers between the front of the
seat and the calf (K). Adjust the kneepad so it fits
comfortably up to the knees (L).
(K) (L)