Owner`s manual

page 10

Configuration Assembly-Shadow Support Tray

FIG. 12

FIG. 13

FIG. 14

FIG. 15

FIG. 9- Attach the axle weldment to the front column with bolts and tighten securely.

FIG. 10- Attach the casters to the rear of the base, lock the casters and hand tighten, do not overtighten.

Slide the front column into the opening of the main frame as shown. Install the four bolts into the holes.

Do not tighten securely until all bolts are started.

Flip down footplates and insert quick adjust handles. Tighten securely.

FIG. 11- Install the left table arm rest. Tighten bolts securely.

FIG. 12- Install the right table arm rest. Tighten bolts securely

FIG. 13- Install the table top onto the right table arm rest. Tighten bolts securely.

FIG

. 14-

Place kneepad onto knee bracket. Insert screws and tighten securely.

FIG. 15- Remove the bolts from the pump handle and install it onto the pump on the main frame and tight-

en securely. Insert top of handle into pump handle and tighten securely.

For Shadow Support

ray adjustments, see page 26.