User manual

ERQ12-U4R2 & ERQ12-F2R2 Serial ATA Disk Array Systems
17
2 Basic Configuration – Installing Disks
Installing Disks
This section describes how to install disks in the disk array system. Read “Understanding RAID”
on page 3 to decide how many disks are required.
1 Unlock the front panel door, then pull it open.
2 Push the button (A) to release the disk tray handle. Pull the handle (B) to release the tray.
3 Align the rear of the disk with the rear of the disk tray.
4 Insert the disk into the disk tray and fix into place with screws supplied with the disk.
A
B