Operation Manual

5. Connecting the camera
The camera can be connected to the computer as Mass Storage Device.
6. Specifications
Sensor 5.0 Mega pixel CMOS sensor
Image resolution 5.0 Mega pixels: (2560x1920)
Lens F/2.8 f=8.5mm
Focus range 0.5m. ~ Infinity
Macro mode 11cm – 18cm
Digital zoom 8x
Flash strobe Built-in (Auto)
LCD display 2.4” TFT color display
White balance Auto
Video mode 30fps@QVGA &30fps@VGA
Built-in memor
y
16 MB Flash memor
y
Picture capacity in
16M memory
5.0M: (2560x1920)--18
Pictures
External memory
SD card supports up to 4GB
File format Picture: JPEG, Video: AVI
PC interface USB 2.0
Power source 2xAA alkaline batteries.(Rechargeable battery is not recommended)
8. System requirement
Windows XP/Vista or above
Operating System
Mac 9.x or X.
x
CPU Pentium II or above
RAM At least 64MB
Interface USB
p
ort
CD 4x s
p
eed CD ROM or above
9. Troubleshooting
Problem Cause Solution
Cannot turn on the
camera.
Low battery power.
Battery placed at wrong
polarities.
Replace or install the battery
correctly.
Photos can not be
saved when taking
pictures.
The memory card or built-in
memory hasn’t been
formatted properly.
Cannot find removable
disk after connecting
the camera to the
computer
.
Connection failure. Make sure all cable connections
are secured and restart the
computer if necessary.
Flash does not work. Battery Power is too low. Replace with new ALKALINE
battery.
The batteries used up
very fast.
Use wrong type of battery. Replace with new ALKALINE
battery.
The photos are blurry The camera is not held
steadily
Hold the camera steadily until it
beeps when taking photo.
Cannot preview image
in PC Camera mode.
“Preview” is not selected in
option Menu in PC.
Click “preview” in the “option” menu
to select it.
For EU only