Operating instructions

STORING THE INSTRUMENT
21
First all status lights on top of the Controller briefly light up. Then the Scan
Head lights and the lights of the detected modules will start blinking, and
all other status lights turn off. The status lights remain blinking until the
Controller is initialised by starting the easyScan 2 software.
Storing the Instrument
If you have to send in the instrument, transport it or if you are not using it
for some time, please pack it in the shipping package or instrument case, so
that the instrument is protected from dust.
- Turn off the instrument as described in section Finishing (p.47), and
remove all cables.
- Pack all components as shown in figure Packing.
Important!
Before transport, always close the protective cover of the scan head, and put
the instrument in the original Nanosurf shipping box or Instrument Case.
Warning!
This product contains a
Class 1 Laser
Invisible laser radiation!
The laser is located behind the cantilever.
Although the optical power should do no damage when the instrument
is assembled, avoid looking directly into the laser beam.
Laser source information:
Wavelength: 830nm
Optical power: <0.4mW
Class one Laser