Operating instructions

CONNECTORS, INDICATORS AND CONTROLS

4. Screwdriver, 2.3 mm

5. Cantilever insertion tool (usually mounted in DropStop

6. DropStop)

7. Sample holder (with AFM Sample Stage)

8. AFM Basic Sample Kit (option) with CD-ROM Sample, Microstruc-

ture sample

9. AFM Calibration Samples Kit (option) with Calibration grid: 10 µm/

100nm, Calibration grid: 660nm, Flatness sample

10. Set of 10 CONTR cantilevers (option)

11. Set of 10 NCLR cantilevers (option)

12. USB dongle for the Nanosurf Report software (option)

Connectors, Indicators and Controls

Use this section to find the location of the parts of the easyScan 2 AFM that

are referred to in this manual.

The Scan head

Parts of the scan head: Scan head with video camera

Spiral cable

connector

Levelling

screws

Ground

connector

Socket for Cantilever

insertion tool

Cantilever on

Alignment chip

Camera

connector

Scan head

serial number