Operation Manual

EasyGuard IP200
Appendix A. List of Tested NAT/router Devices
The followings are the list of tested NAT/router devices that can work with the IP
CAM and CamView software when viewing in a remote location. You do not need to
do any modification on the default settings of the NAT/routers. In some office
environment, if some strict firewall function is enabled, it’s possible that you can not
view the IP CAM video through the firewall router. In this situation, please contact
your MIS person to solve the problem.
Brand name
Model name
Asus
WL-550gE
Belkin
P5D7230-4
Buffalo
WHR-G54S
Buffalo
WHR-HP-G54
Corega
CG-WLBARGO
D-Link
DI-524
LanTech
WL54G-BR
Linksys
WRT54G
Netgear
WNR834B
PCi
BLW-HPMM
SMC
SMCWBR14-G2
ZyXEL
P-334WH
Table A-1: List of tested Wireless AP/router devices
Brand name
Model name
AboCom
CAS5047
ASUS
RX3041
Buffalo
BBR-4HG
Corega
CG-BARSD
DLink
DI-604
Edimax
BR-6104K
LanTech
HR-114Pro
Lemel
LM-IS6500
PCi
BRL-04R
ZyXEL
Prestige-334
Table A-2: List of tested Wired NAT/router devices
Appendix B. Maximum Allowed Video Users
The maximum allowed video users for a single IP Camera at the same time is
dependent on the video settings including “Internet speed” and resolution. The
followings are the summary of the maximum allowed video users:
Notice : when the IP camera is doing NAS recording, this is counted as one
video user.