Operation Manual
7
EN
Section 2
Getting Started
Loading the Battery
Beforeusingthecamera,youmustloadtheLithium-ion
rechargeablebatterycomewithinthepackage.
Insertthebatteryaccordingtothecorrectpolaritymarks(+or1.
-).
Closethebatterycoverrmly.2.
Charge your battery
YoumustusethesuppliedACchargerortheUSBcable.Thecameramustbe
turnedOFF.Theblinkinglightconrmsthecameraiscurrentlycharging,and
thelightbecomesconstantafterthechargingiscompleted.InACcharging
Mode,the light will turnitselfoffautomaticallyafter3~5 minutes .The full
chargetimeisabout4to5hours.(Actualchargingtimemayvary.Itdepends
onthebatteryconditions.)
Inserting and Removing an SD Card (Optional)
The camera comes with an internal memory that allows you to store
photosandvideos.Youcanexpandthememorycapacitybyusingan
optionalSDmemorycard.
Insertthememorycardintothe slot.Pleaserefertothegureon1.
the right side.
ToremovetheinstalledSDcard,pressthecardinwardtorelease2.
it.
When the card pops out, gently remove it from its slot.3.
Recommendedmemorycapacity:1GBorabove.4.
Note
When amemory card is tted, videos/photos are saved to the card rather than the built-in•
memory.
Protecting Data on an SD Card: SD Card is read-only •
when it is locked. No photos or videos can be recorded
when the SD card is locked. Make sure the lock is on
the writeable position before recording any media.
Writeable
position
Write-Protected
Position










