Operation Manual
37
EN
Section 10
Troubleshooting
Troubleshooting
The ash is not working.1.
The battery power is low.
The camera is in DC power mode.
Inashautomode,cameraashresONLYwhennecessary(indarksettingasexample).
The les on the memory card do not display smoothly when the LCD shows the “!” marking.2.
The“!”meanstheSDcardislowspeedorishavingwrongcontentinside.Thewaytosolvethis
conditionistoformatSDcardbythecamerainsteadofaPC(PleaserefertothedetailedFormat
instructioninSection5).
OrpleasechangetheSD/SDHC/SDXCcardtoahighspeedone.
Why do some of my indoor photos look blurry and dark?3.
Thecameraextendsphotoexposuretimeunderlowlight/indoorcondition.Keepthecamera(and
thetargetsubject)steadyforseveralsecondswhentakingphotos.Theshutterwillsoundwhen
photosarebeingtaken.
How do I charge battery?4.
YoumustusethesuppliedACchargerortheUSBcable.ThecameramustbeturnedOFF.The
blinkinglightconrmsthecameraiscurrentlycharging,andthelightbecomesconstantafterthe
charging is completed. InACchargingMode,thelightwillturnitselfoffautomaticallyafter3~5
minutes . The full charge time is about 4 to 5 hours. (Actualchargingtimemayvary.Itdependson
thebatteryconditions.)
After connecting the USB cable to the computer, ……5.
The disk [DV] indicates the internal memory of the camera. (The disk label may be different1.
accordingtodifferentmodelandPCOS.)
[Removable Disk] indicates the external memory. (Under thecircumstances ofwithin theSD/2.
SDHC/SDXCcardinthecamera)
Thedisk[DVAP]indicatesthebuilt-inInternetDirectapplicationissavedatthisdisk.PleaseDO3.
NOTformatthisdiskordeletetheapplicationinside;otherwise,theInternetDirectapplication
can not function.










