Operation Manual

31
Note: the design specification of the product was formulated according to the latest information
when compiling this instruction. There is no prior notice for any modification. Please refer to the
actual digital video.
FAQ
The camera fails to
start up after installing
batteries
There is not enough power, please replace batteries.
Do not remove the battery package
Install batteries in wrong direction. Please check whether the
battery has been installed correctly.
Fail to take photos or
record videos after
pressing the Shutter
key
The internal memory is full. Please store shot files in other
storages.
The photo is vague.
Please keep the digital video stable. Do not shake the digital
camcorder when shooting.
The photo or video is
dim.
There is not sufficient light when shooting. So please shoot in
circumstance with full light or use lamps to increase the
brightness of light.
The camera turns off
automatically.
There is not enough power, please replace batteries。
To save power, the digital camcorder will turn off automatically
after being in idle mode for more than 1min (3min or 5min,
according to various settings).
Fail to delete files in
the digital video
The function of file protection is enabled. Please disable such
function in Camera menu.