Operation Manual

24

Flash
There are four flash settings under Camera Mode. To change flash settings, press the hot key
(Right Button) or select from the option menu.
Auto Flash( )：The flash fires automatically according to light conditions. Use this mode
for general photography.
Flash On( )：The flash will fire in every shot.
Flash Off( )：The flash will not fire under any circumstances. Use this mode when taking
images in a place where flash photography is prohibited, or when the subject is distant
(beyond the range of the flash).
Red-Eye Reduction( ): The flash fires twice before the picture is taken
To change Flash setting:
1. When in Camera Mode, use T/W key to select Flash Option, then press Enter Button to
switch to Flash submenu.
2. Use T/W key to select setting.
3. Press Enter Button to validate the setting and exit.
Note
z The flash will be disabled automatically
when battery power is low (
)
Display Screen Flash Options
Enter Button