Operation Manual

ManualsBrandsEasypix ManualsDigital CameraAquapix W1024 Splash

Manual

IMPORTANT

- Don’t open the battery door under water.

- Close the battery door properly for best water sealing.

- Rinse the camera with clean water after used and keep it dry for

storage.

1. Getting to know your camera

3m waterproof design

10.0 Mega pixels resolution sensor

Digital still camera

Digital video recorder

Built-in flash light

4x digital zoom

2.4 " TFT color display

Micro SD card support

2 x AAA alkaline batteries

2. Functional parts

Shutter

Press this button to take photographs or to start /stop recording

a video clip, or to confirm changes in menu mode.

Power on/off

button

Press this button to switch on and press it for at least 2 seconds to

shut off. Or press it to hide/display the status icon on the LCD

screen.

Strap hook

Hook for attaching the wrist strap to the camera.

Flash light

Use the built-in flash to give the subject extra lighting if it is in dark

surrounding（the best flash distance is recommended within 1.5m).

Lens

Records the image to be taken.

Note: Keep the lens clean. Dirt and fingerprints will affect the quality

of the picture.

Busy indicator

When the indicator is blinking, the camera is busy.

Macro switch

Macro mode: Select this mode to take close-up photographs

(distance 11cm - 18cm).

Normal mode: Select this mode to take photographs from

0.5m - infinity.

LCD screen

Display photographs, video clips, camera setting and menu.

Up/Tele

In Preview mode: press this button to Tele (zoom in);

In Menu mode: press this button to up the selection bar.

In Playback mode（photo）: press this button to zoom in.

In playback (Video playing) mode: press it to start/pause the video.

Down/Wide

In Preview mode: press this button to Wide (zoom out);

In Menu mode: press this button to down the selection bar.

In Playback mode（photo）: press this button to zoom out.

In Playback mode: press this button to get into the thumbnail mode

Left / Flash light

In Menu mode: press this button for the left selection;

In Playback mode: press this button to the previous one;

In Photo infinite Preview mode:

press this button to switch Flash modes; (the flash light cannot be

used in macro mode）

In Photo (zoom in) Playback mode : press it to move to the left area

of the photo.

In playback (Video playing) mode: press it to fast rewind.

Right / Playback

Press this button to get into Playback mode;

In Playback mode: press this button to the next one;

In Menu mode: press this button for the right selection;

In Photo (zoom in) Playback mode: press it to move to the right area

of the photo.

In playback (Video playing) mode: press it to fast forward.

Mode

Press this button to switch between movie and still capture mode;

In Playback mode：press this button to exit.

In Photo (zoom in) Playback mode：press it to move to the up area

of the photo. In playback (Video playing) mode: press it to stop the

video.

Menu / Delete

In Preview mode: press it to enter the settings Menus.

In Playback mode:

Press it for a short time to enter “Delete single/ all files” mode;

Press it for a long time to enter file compiling and system setting

menu. In Photo (zoom in) Playback mode: press it to move to the

down area of the photo.

Tripod connector

To fix the camera on tripod.

Micro SD card

slot

Micro SD card storage location.

USB interface

Via this connection, you can download photographs and video clips

to a computer.

Battery

compartment

Compartment for 2 x AAA alkaline batteries

3. Explanation of the status icons

Item

Function

Description

Mode selected

Photographs mode.

Videos mode.

Flash indicator

Force flash: The flash is on in any

environment.

Auto flash: The camera determines if

the flash should be used or not.

No flash: The flash is turned off.

Normal/Macro

mode indicator

Normal mode (0.5m – infinity).

Macro mode (11cm – 18cm).

Self-timer

Shows selected Self-timer setting

Selected resolution

16M = 4608x3456; 10M = 3648x2736;;

5M = 2592x1944; 3M = 2048x1536;

VGA = 640x480

Picture quality

Super fine.

Fine.

Normal.

Battery indicator

The batteries are full.

The batteries are empty.

Zoom indicator

Shows the zoom ratio in preview mode

The micro SD card

indication

The micro SD card is inserted and will be used

as storage for PHOTO and VIDEO

White balance

Shows the selected white balance mode

Photo/Video counter

Photo mode: No. of pictures that can be taken.

Video mode: Recording time in second..

4. Details for camera setting

Settings

Photo

Resolution

16M pixel resolution

4608x3456

10.0M pixel resolution

3648x2736;

5.0M pixel resolution

2592x1944

3.0M pixel resolution

2048 x 1536

VGA resolution

640 x 480

Quality

Super Fine/Fine/Normal

Picture quality setting

Metering

Center/Multi/Spot

Metering setting

White balance

Auto

Automatic white balance

Daylight

White balance selected for

daylight surrounding

Cloudy

White balance selected for cloudy

surrounding

Tungsten

White balance selected for

tungsten lighting

Fluorescent

White balance selected for

fluorescent surrounding

ISO

Auto/100/200/400/800

Sensitivity selection

Exposure

±2.0, ±1.7, ±1.3, ±1.0, ±0.7,

±0.3, 0

Exposure setting

Self Timer

On/Off

Self timer setting

Sharpness

Hard/ Normal/ Soft

Sharpness setting

Effect (Preview)

Normal/ B&W/ Sepia/

Negative/ Lomo/ Pencil

Sketch/ Red/ Green/ Blue/

Vivid

Effect setting

Effect

(Playback)

B&W/Sepia/Negative/Mosa

ic/Red/Green/Blue

Date Stamp

On/ Off

Date stamp setting

Quick View

On/ Off

Quick view setting

Video

Movie Size

VGA 640 x 480

QVGA 320 x 240

Video resolution setting

White balance

Auto

Automatic white balance

Daylight

White balance selected for

daylight surrounding

Cloudy

White balance selected for cloudy

surrounding

Tungsten

White balance selected for

tungsten lighting

Fluorescent

White balance selected for

fluorescent surrounding

Setup

Sounds

Off/On

Sounds setting

Frequency

50Hz / 60Hz

Select power frequency in your

location

Power Save

Off / 1Minute / 3 Minutes

Auto power off selection

Language

English/German/Italian/

Portuguese/French/Spanis

h/ Japanese

Display language selection

Date/Time

YY/MM/DD;DD/MM/YY

MM/DD/YY;

Date or time setting

Format

Yes/ No

Format the memory location

selection.

Reset All

Yes/ No

Reset all setting

Version

See the firmware version

Note: The camera will remain the last setting when it is turned off.

5. Using the camera

5.1 Installing the batteries

1. Open the battery door.

2. Insert 2 x AAA alkaline batteries into the camera.

3. Close the battery door.

Summary of content (3 pages)

PAGE 1
1 Left / Flash light Manual IMPORTANT - Don’t open the battery door under water. - Close the battery door properly for best water sealing. - Rinse the camera with clean water after used and keep it dry for storage. 1. 12 Right / Playback 13 Mode Getting to know your camera 2. Functional parts 14 Menu / Delete 15 Tripod connector Micro SD card slot 16 White balance 11 Photo/Video counter 4. USB interface Via this connection, you can download photographs and video clips to a computer.
PAGE 2
1. 2. 3. 4. 5. 6. 7. 8. 5.2 Inserting a memory card (not Included) Follow the instructions given below to insert the optional micro SD memory card into the camera. 1. Turn off the camera first. 2. Open the card bar. 3. Insert the micro SD card into the camera. 5.8 1. 2. 3. Note: There is only one right direction to insert the micro SD memory card into the slot. Do not force the card into the slot, or else it may damage both the camera and the micro SD memory card.
PAGE 3
Before using your camera in the water please verify that all lids and locks are tightly closed and sealed. After using the camera in water please let it dry. The camera should not be exposed to high temperatures and humidity differences to avoid condensation behind the lens. Open the battery compartment only when the camera is dry. HOW TO OPEN THE BATTERY COMPARTMENT OF THE CAMERA Push the release lever toward the rear of the camera.