User manual

EN 32
* PLEASE NOTE:
• The specifi ed values are emission values and they do not therefore also represent safe
workplace values. Although there is a correlation between emission and immission
levels, it cannot reliably be inferred from this whether additional precautionary
measures are necessary or not. Factors which infl uence the current immission level
existing at a workplace include the nature of the workspace, other noise sources,
e. g. the number of machines and other working processes taking place nearby. The
permitted workplace values can also vary from country to country. However, this
information should help you to be able to make a better assessment of hazard and
risk.
• The specifi ed total vibration value and the specifi ed noise emission values have been
measured using a standardised testing method and can be used to compare one
power tool with another one. The emission values can also be used to make a prelim-
inary assessment of the level of pollution.
• The vibration and noise emissions may vary from the specifi ed values when the
power tool is actually used, depending on the way in which the power tool is used, in
particular what kind of workpiece is being machined.
Troubleshooting
If the device does not work properly, check whether you are able to rectify the problem
yourself. If the problem cannot be solved with the steps that are listed, contact the
customer service department.
Do not attempt to repair a defective electrical device yourself!
Problem Possible cause Fix
The device does not
work.
The mains plug is not
inserted correctly in the
socket.
Insert the mains plug.
The mains cable of the
device is not connected
properly to the extension
cable.
Check the connection
between the mains cable and
extension cable.
The socket is defective. Try another socket.
The extension cable is
defective.
Use a new extension cable.
No mains voltage is present.
Check the fuse of the mains
connection.
The On / Off switch (12) is not
fully pressed or is not being
held down.
Press down the release
button (14) and the On / Off
switch at the same time and
keep the On / Off switch
pressed down.
02978_DE-EN-FR-NL_A5_V2.indb 3202978_DE-EN-FR-NL_A5_V2.indb 32 14.05.2018 11:14:2014.05.2018 11:14:20