MSDS

DOW CORNING CORPORATION
Material Safety Data Sheet
Page: 3/7
DOW CORNING(R) 4 ELECTRICAL INSULATING COMPOUND
Containment/Clean up: Observe all personal protection equipment recommendations described in Sections 5
and 8. Wipe up or scrape up and contain for salvage or disposal. Clean area as
appropriate since some silicone materials, even in small quantities, may present a slip
hazard. Final cleaning may require use of steam, solvents or detergents. Local, state,
and federal laws and regulations may apply to releases and disposal of this material, as
well as those materials and items employed in the cleanup of releases. You will need
to determine which federal, state and local laws and regulations are applicable.
Sections 13 and 15 of this MSDS provide information regarding certain federal and
state requirements.
Note: See section 8 for Personal Protective Equipment for Spills. Call Dow Corning Corporation, [phone],
if additional information is required.
7. HANDLING AND STORAGE
Use with adequate ventilation. None. Avoid eye contact.
Use reasonable care and store away from oxidizing materials.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Component Exposure Limits
There are no components with workplace exposure limits.
Engineering Controls
Local Ventilation: None should be needed.
General Ventilation: Recommended.
Personal Protective Equipment for Routine Handling
Eyes: Use proper protection - safety glasses as a minimum.
Skin: Washing at mealtime and end of shift is adequate.
Suitable Gloves: No special protection needed.
Inhalation: No respiratory protection should be needed.
Suitable Respirator: None should be needed.
Personal Protective Equipment for Spills
Eyes: Use proper protection - safety glasses as a minimum.
Skin: Washing at mealtime and end of shift is adequate.
Inhalation/Suitable
Respirator:
No respiratory protection should be needed.
Precautionary Measures: Avoid eye contact. Use reasonable care.