MSDS

ManualsBrandsEasyheat ManualsConnection KitsFreeze Free Connection Kit

Appleton Grp LLC

9377 W. Higgins Road

Rosemont, IL USA 60018

T (847) 268-6000

IMPORTANT: EMERGENCY CONTACT

INFORMATION IS ENCLOSED.

Dear Customer,

Enclosed please find the Safety Data Sheet (SDS) for the gel contained in Freeze Free Fused

Plug and End Seal, used in the following EasyHeat catalog numbers:

10802

10803

10805

10815

4102

4302

FFEC

NPRO-100

NPRO-50

This product is purchased from the manufacturer by EasyHeat and is distributed with no

modification other than packaging, as applicable. Questions regarding application and use may

be directed to EasyHeat Technical Support.

Any questions regarding the composition, safe use or potential hazards associated with

this material that are not answered in the SDS should be directed to the manufacturer.

Thank you for your support of EasyHeat and our extensive product line.

Summary of content (8 pages)

PAGE 1
Appleton Grp LLC 9377 W. Higgins Road Rosemont, IL USA 60018 T (847) 268-6000 IMPORTANT: EMERGENCY CONTACT INFORMATION IS ENCLOSED. Dear Customer, Enclosed please find the Safety Data Sheet (SDS) for the gel contained in Freeze Free Fused Plug and End Seal, used in the following EasyHeat catalog numbers: 10802 10803 10805 10815 4102 4302 FFEC NPRO-100 NPRO-50 This product is purchased from the manufacturer by EasyHeat and is distributed with no modification other than packaging, as applicable.
PAGE 2
DOW CORNING CORPORATION Material Safety Data Sheet Page: 1/7 DOW CORNING(R) 4 ELECTRICAL INSULATING COMPOUND 1. IDENTIFICATION OF THE SUBSTANCE AND OF THE COMPANY 24 Hour Emergency Telephone: Customer Service: Product Disposal Information: CHEMTREC: Dow Corning Corporation South Saginaw Road Midland, Midland 48686 MSDS No.
PAGE 3
DOW CORNING CORPORATION Material Safety Data Sheet Page: 2/7 DOW CORNING(R) 4 ELECTRICAL INSULATING COMPOUND The above listed potential effects of overexposure are based on actual data, results of studies performed upon similar compositions, component data and/or expert review of the product. Please refer to Section 11 for the detailed toxicology information. 4. FIRST AID MEASURES Eye: Immediately flush with water. Skin: No first aid should be needed. Inhalation: No first aid should be needed.
PAGE 4
DOW CORNING CORPORATION Material Safety Data Sheet Page: 3/7 DOW CORNING(R) 4 ELECTRICAL INSULATING COMPOUND Containment/Clean up: Observe all personal protection equipment recommendations described in Sections 5 and 8. Wipe up or scrape up and contain for salvage or disposal. Clean area as appropriate since some silicone materials, even in small quantities, may present a slip hazard. Final cleaning may require use of steam, solvents or detergents.
PAGE 5
DOW CORNING CORPORATION Material Safety Data Sheet Page: 4/7 DOW CORNING(R) 4 ELECTRICAL INSULATING COMPOUND Comments: None. Note: These precautions are for room temperature handling. Use at elevated temperature or aerosol/spray applications may require added precautions. 9.
PAGE 6
DOW CORNING CORPORATION Material Safety Data Sheet Page: 5/7 DOW CORNING(R) 4 ELECTRICAL INSULATING COMPOUND 12. ECOLOGICAL INFORMATION Environmental Fate and Distribution No specific information is available. Environmental Effects No specific information is available. Fate and Effects in Waste Water Treatment Plants No specific information is available.
PAGE 7
DOW CORNING CORPORATION Material Safety Data Sheet Page: 6/7 DOW CORNING(R) 4 ELECTRICAL INSULATING COMPOUND Air Shipment (ICAO) Not subject to ICAO regulations. Call Dow Corning Transporation, (517) 496-8577, if additional information is required. 15. REGULATORY INFORMATION Contents of this MSDS comply with the OSHA Hazard Communication Standard 29 CFR 1910.1200. TSCA Status: All chemical substances in this material are included on or exempted from listing on the TSCA Inventory of Chemical Substances.
PAGE 8
DOW CORNING CORPORATION Material Safety Data Sheet Page: 7/7 DOW CORNING(R) 4 ELECTRICAL INSULATING COMPOUND CAS Number 68037-74-1 7631-86-9 70131-67-8 Wt % > 60.0 7.0 - 13.0 5.0 - 10.0 Component Name Dimethyl, methyl silicone resin SILICA, AMORPHOUS FUMED Dimethyl siloxane, hydroxy-terminated Pennsylvania CAS Number 68037-74-1 7631-86-9 70131-67-8 Wt % > 60.0 7.0 - 13.0 5.0 - 10.0 Component Name Dimethyl, methyl silicone resin Silica Dimethyl siloxane, hydroxy-terminated 16.