Installation Guide

Shelter
Set-Up Instructions
EasyGoProducts.com
TM
Place tent on ground vercally
with the hub facing upward and
spread out poles evenly on the
ground, ensuring smooth set-up.
Set-Up
Stand at backside of shelter. Take
cords and pull on them with away
from each other so that the hub
and the lower secon lock together.
To secure the shelter, stake into
the ground using provided
ground pegs or fill sand backs on
sides and back.
If any of hinged poles are bent
inward just pull out on it unl it
pops into place.
Front Panel can be zipped up to
close for changing or sleeping or
tucked under floor when open.
Grab top pole with right
hand and lower pole with
le hand and push down
with le hand to release
hub. Be careful to keep
head away as hub pops
toward you!
Aer shelter collapses, the
tent should look as it did in
step 1 of the setup. Simply
reverse the process, and
place all the poles together
at the top.
Lay the folded shelter on its
side with all the poles
together and roll all excess
fabric together.
Take Down
Store in included carry bag.