Operation Manual

11.2 Siren EA-SIR-RJ45

Primary voltage 230 VAC / 50 Hz

Secondary voltage: 12 VDC 3 VA

Dimension: 120 x 65 x 77mm (L x W x H)

Weight: 200 g

Length of cable: 3 m

Installation: connect in place of the BBT-DC12S-RJ45 AC-adapter

Functions:

A) periodical ton of the siren (during inactive waiting period)

B) in case of an alarm in listening-in connection, the siren can be activated permanently

C) the siren can be switched on/off during phone connection by entering DTMF 6 / DTMF 4 .

11.3 230V-Switch EA-SWI-RJ45

Same as EA-SIR-RJ45, but instead of the siren a 230VAC load (f.e. a light) can be switched on/off during connection.

Output cable with Euro-jack-connector with maximum load of 2.5A.

Activation of output:

A) Output is activated automatically, as soon as an alarm criteria is fulfilled (siren, floodlight)

B) Output is activated automatically, if an alarm remains unacknowledged (siren, floodlight)

C) Output is activated during phone connection by request (siren, floodlight)

11.4 DIN-Adapter interface EA-ACDC-SWI-RJ45

Primary voltage: 230 VAC / 50 Hz

Secondary voltage: 12 VDC / 150 mA (no load < 17.5 V)

Safety label: EN60950, 1992

Dimension: 52.5 x 93 x 68.5mm (L x W x H)

Weight: 250 g

Connection: Screw terminal

Relay output: max. 2A / 1000 VA (make contact)

Optocoupler input: 10..230 V (AC or DC) => sensor 1

Dimensions: 120 x 65 x 42 (L x W x H)

Cable: 3m (RJ45)

Weight: 500 g

Installation: connect in place of the BBT-DC12S-RJ45 AC-adapter

Activation of output:

A) Output is activated automatically, as soon as an alarm criteria is fulfilled (siren, floodlight)

B) Output is activated automatically, if an alarm remains unacknowledged (siren, floodlight)

C) Output is activated during phone connection by request (siren, floodlight)

D) Operation as a remote-controlled system (remote switching of heater, engines and so on)

E) many more applications are possible

Remote Switching procedure:activation of output DTMF 6 / deactivation of output DTMF 4