User`s manual

Lexis Light – ET1B User’s Manual T. Rev. 0512 PM 11
Blinki ng - Needs Chargin g
BATTERY
FORWARDREVERSE
SPEED
LO HI
BATTERY
REVERSE FORWARD
SPEED
Blinking - Needs Charging
LO HI
BATTERY
REVERSE FORWARD
SPEED
Blinki ng - Needs Chargin g
LO HI
 Indicator light flashes – This indicates a possible fault. Please
follow the following procedure:
1. Switch off the Lexis Light
2. Make sure that the Lexis Light is not in the
FREEWHEEL position.
3. Make sure that the charger is not connected to the Lexis Light
4. Make sure that the control lever is in the middle position.
CAUTION: If control lever does not return by itself to the middle
position - do not operate. Contact your service agent.
5.
Switch the Lexis Light on again and check the indicator
light. If it flashes rapidly again, switch off and do not operate.
Contact your service agent!
5.3. Battery Gauge (Fig. 9/5)
The Battery Gauge (Fig. 9/5) shows the battery charge that is left.
5.4. Driving your Lexis Light
To drive forward, pull the right side of the hand control lever towards you
(Fig. 10/1). You can also move forward by pushing the left side of the
control lever away from you. By releasing the control lever, you will
gradually come to a stop, and the Lexis Light brake will be
applied automatically. To operate in reverse, pull the left side of the hand
control lever towards you (Fig. 10/2).
Figure 10