Service manual

Easy Travel – Service Manual Rev. 0401 47

The following table shows the Solo Controller settings for the EasyTravel as defined by Tzora Active Sys-

tems.

Function Fast Slow

Forward Acceleration 2.0 s 2.0 s

Forward Deceleration 0.9 s 1.3 s

Reverse Acceleration 3.0s 3.0 s

Reverse Deceleration 2.5s 2.5 s

Forward Speed 100% 50%

Reverse Speed 50% 30%

Invert Throttle Polarity No

*Power Down Timer* 10 min

Current Limit 20A

Motor Compensation 200mΩ

Hold Factor 152%

Mid Current 50%, 10 s

Brake Time 0.1s

ISO Tests Off

Inhibit Polarity Lo

Bridge Hold Time 200 ms

Throttle Gain 750%

Pulse Reverse Alarm No

Wig-wag Throttle Yes

Low Battery Flash Inhibit No

Throttle Deadband 15%

Output Voltage 24V

TruCharge Cable Resistance 40mΩ

TruCharge Cal. 95

4.3 Using The SP1b

Please contact Tzora Active Systems for more information about and the acquiring of the SP1b Programmer.

The Programmer is shipped with an extensive guide. Please read the guide carefully before using the SP1b

Programmer.

Setting parameters to incorrect values could damage controllers and motors, and invalidate any war-

ranties.