Service manual

Easy Travel – Service Manual Rev. 0401 14
3.7 Contacts and Charging Socket Assembly
Kit number E0-00-1-703 (for serial # start-
ing with 11B)
Tools:
Phillips #1 Screwdriver
Phillips #2 Screwdriver
1. Remove Controller Cover, see instruc-
tion 3.3
2. Open Controller, see instruction 3.4
3. Disconnect wiring to Controller and to
Power Cable, see instruction 3.4
4. Unscrew 3 Screws (12a-A) and two
Screws (12a-B)
5. Remove Contacts and Charging Socket
Assembly (12a-C) and replace
6. Secure new Assembly (12a-C) with
Screws (12a-A, B)
7. Connect wiring to Controller and Power
Cable and close Controller, see instruc-
tion 3.4
8. Reassemble Controller Cover, see in-
struction 3.3
9. Check drive, brake and freewheel op-
eration
Figure 12a