User`s guide

Cambridge Aero Explorer User’s Guide
Change Workspace… - This menu will change which folder, disk or flashcard
the workspace represents.
Paste - This command will copy the file from the Windows clipboard to the
selected workspace. This menu is only active after a flight log, SUA file or
navpoint file has been either cut or copied to the windows clipboard. This cut or
copy operation could have been done either from the PC pane in the Cambridge
Aero Explorer, or anywhere in the Windows file explorer.
Rename -This menu will let you to edit the name of the workspace.
Delete - This menu will let you remove the workspace from the PC pane. Note
that this process will destroy none of your files. It simply removes the
workspace from the PC pane The top most workspace may be renamed, but
cannot be deleted.
Explore… - This menu will open the folder that the workspace references. This
will let you see all the files in this folder, not just the ones the Cambridge Aero
Explorer can recognize. This is useful to help you troubleshoot the problem of
having an Airspace or navpoint file in the folder that is not showing up in the PC
pane.
Import File… - This menu will prompt you to browse the contents of your
computer to select a log, SUA or navpoint file to copy into your workspace.
This is especially useful if you have a file on a floppy disk you want to bring
into your workspace.
Folder icons in the PC pane
Paste - Similar to Workspace Paste, see above.
New Folder… - Similar to Workspace New Folder, see above
Import File… - Similar to Workspace Import File, see above
Set As Default > Flight Log Folder - When logs are transferred from the
recorder to the PC, by default they are transferred to the default flight log folder.
You can easily change this default with this menu command. Simply click on
the folder and select this menu.
Set As Default > Navpoint Folder - When navpoints are transferred from the
recorder to the PC, by default they are transferred to the default navpoint log.
This folder also acts as the default folder whenever you are prompted by the
program to select a navpoint file. You can easily change this default with this
menu command. Simply click on the folder and select this menu
Rename - Similar to Workspace Rename, see above
Delete - This command will remove the folder from the workspace and from
your hard drive. The folder must be empty to be deleted.
Explore… - Similar to Workspace Explore, see above
SUA & Navpoint icons in the PC pane
Send To > Floppy Disk - This command will copy the selected file to the
floppy drive of your computer designated as the A: drive. This is very
convenient at contests when you might want to make a copy of some of your
navpoints and give them to a friend.
Send To > Flash Card - This command will copy the selected file to the
compact flashcard inserted in your computer. You must have a flashcard
inserted in your computer for this command to be available. Also, for the
program to recognize your flash card, it must have a folder called “My
Documents” on it. This is very convenient when you want to transfer some
navpoints and SUA files to your Pocket-Nav system via the flashcard.