Instructions / Assembly

WARNING:

Cutting, sanding or machining wood products produces wood dust. While

wood products are not hazardous under OSHA Hazard Communication

Standard (29CFR 1910.1200), the International Agency for Research on

Cancer (IARC) and the State of California has classiﬁed wood dust as a

human carcinogen.

EXPECT THE NATURAL VARIATION OF WOOD:

All our wall planks are designed to highlight the natural variation of wood on

structure and in color. Each wood piece is different, but all together they

create an ensure consistency of the ﬁnal product visual. Sunlight or intense

artiﬁcial lighting can cause slight color changes.

SURFACE REQUIREMENTS:

The surface must be clean, dry, and structurally sound. The surface must be

ﬂat to within 1/4” over 48”

FIREPLACES & HEATERS:

NOT recommended the use of wood wall paneling around an open “ﬂame”

places. The wall planks are made from wood which is ﬂammable material.

BATHROOMS:

Wall planks may be used in bathrooms as long as they are NOT installed at

high splash areas.

CEILING APPLICATIONS:

Ceiling applications are possible as soon as you’re following the

corresponding builder codes. The length of the planks is exactly matching to

the size of Armstrong grid structure for suspended ceilings.

OUTDOOR APPLICATIONS:

Planks are made from thermo-treated wood, which is rated for outdoor

applications. Thermo-treatment protects wood against decay for at least 25

years used outdoors. To save a natural color of thermo-treated wood and

appearance in outdoor applications use any outdoor oil with UV-protection.

Follow the direction of oil application provided by the oil manufacturers.

TRIMS:

Use trim of the same color range as wall planks for outlet trim, window trim,

framing, corners, etc. We recommend square edge trim, or any commonly

used trim proﬁle made from wood, metal or plastic.

HOW MUCH DO YOU NEED?

The coverage area for each box is 10 SF, or approx. 8 foot wide and 15 in.

height, or 6 foot wide and 20 in. height, or 4 foot wide and 30 in. height. If

Wall Planks Installation Instruction

Easy Paneling wall decor planks

PAGE 1
Wall Planks Installation Instruction Easy Paneling wall decor planks WARNING: Cutting, sanding or machining wood products produces wood dust. While wood products are not hazardous under OSHA Hazard Communication Standard (29CFR 1910.1200), the International Agency for Research on Cancer (IARC) and the State of California has classified wood dust as a human carcinogen. EXPECT THE NATURAL VARIATION OF WOOD: All our wall planks are designed to highlight the natural variation of wood on structure and in color.
PAGE 2
you cover different shape areas calculate the total surface area of the wall and add 10% for cutting and waste. WALL PREPARATION: Installing planks over existing true walls requires no preliminary preparation. Sanding high spots on the wall is generally about all you have to do. Always check your building code. Thermo-treated wood is Class B fire rated and most wall panels are only allowed to be installed over a solid wall under most building codes.
PAGE 3
Installation Steps with included tape Steps Drawing 1. Select installation orientation: horizontal, vertical or diagonal. 2. Using a level, draw a line for installing the starter plank. Peel and stick one piece of the tape to the back of the Starter Plank and two other pieces to the other end of the plank as shown at the picture. Apply the starter plank to the wall. For the Next Plank apply two pieces of the tape as shown and place the next plank to cover the tape of the Starter Plank.