Product Manual

23
BURNER
No hot water
- Dead battery
- Damaged thermostat
- Damaged pressure switch
- Da
maged ignitor
- Plugged filter or no fuel
- Make sure your battery is fully charged.
-
If the battery’s charge is not full, please replace or re-charge your battery.
- Make sure the thermostat is connected properly.
- If the burner fan does not come on when you turn the thermostat dial, replace the
thermostat.
- If the burner fan comes on, check the pressure switch.
- Make sure the pressure switch is connected properly to the burner unit. Take the cover off the
pressure switch by unscrewing the 4 screws on the front part of the switch (switch is located on the
pump). Without touching the contacts that conduct current, push on the little button found on the
mirco switch (the button is located directly above the part that attaches directly into the pump).
- If the burner comes on, replace the pressure switch.
- If the burner does not come on, make sure there is current going through the swtich
(consult a professional for this if you do not know how to do this properly as you can get
severly injured by the electrical current connected to your machine)
. If current properly flows through the pressure switch to the burner, check the ignitor.
- Please call a repair center or PowerJet’s service line for help to conduct tests on the ignitor.
- If you see vapor coming out the top of the coil when you try to turn the burner on while
the machine is in use, fuel is passing through the system properly but the ignitor is unable
to produce a spark. Replace the ignitor.
- If you don’t see vapor, check the fuel line.
- Make sure you have enough fuel in the tank.
- If you have fuel, make sure the filter and fuel line are not plugged or damaged.
IN ORDER TO AVOID SERIOUS INJURIES, PLEASE DO NOT ATTEMPT TO REPAIR YOUR MACHINE IF THE PROBLEMS YOU ARE FACING ARE GREATER T
HAN
YOUR CAPABILITY TO HANDLE SAFELY. PLEASE CALL POWERJET OR A PROFESSIONAL REPAIR CENTER IF YOU NEED HELP WITH YOUR MACHINE.
FOR THESE STEPS, PLEASE MAKE SURE THE MACHINE IS NOT RUNNING. PLEASE ALSO
TAKE THE NECESSARY
STEPS TO AVOID ELECTRIC S
HOC
K
S AND OTHER INJURIES.