Product Manual
CHEMICAL A
PPL
I
C
A
T
I
O
N
DOWNSTREAM CHEMICAL INJECTION – STANDARD
NOT
E: Do not remove back
flow
preventer as chemical may
flow
back into
the potable water sou
r
ce. Ensure the black nozzle is properly fitted at the
end of the wand. The chemical injector will not function if this nozzle is
not correctly in place.
1. Chemical
preparation
– Select the
detergent/chemical
that best suits
your
cleaning task.
Prepare
the dilution
according
to the
m
anu
f
a
c
t
u
r
e
r
’s
instructions. The volume of chemical being used may be adjusted at
t
h
e
valve located on the chemical
i
n
j
ec
t
o
r
.
2. Insert the intake hose, located on the chemical injector at the pump,
i
n
t
o
the chemical being
u
se
d
.
3. Turn the
adjustment
knob on the wand or lance to the open
p
os
i
t
i
o
n
OR when single lance is used, black nozzle will need to be used
on
wand.
4. To apply chemical, engage the trigger on the pressure wand
a
sse
m
b
l
y.
Turn the chemical injector’s nipple to adjust flow.
5. Chemical can now be applied through the pressure wand assembly. It will
take 5 – 15 seconds for the chemical to travel to the spray nozzle. Volume
of chemical being used or water being supplied may be
adjusted
at the
Chemical
I
n
j
ec
t
o
r
.
6. For best results apply chemical from bottom to top, allow the c
h
e
m
i
c
a
l
proper penetration
time prior to rinsing. Do not allow the chemical
t
o
dry. Rinse from the top to the
b
o
tt
o
m
.
7.
Optional high pressure chemical injection systems available.
P
l
e
a
se
contact Easy Kleen.