Spec Sheet

Call 1-800-315-5533
Email [e-mail]
Visit www.easykleen.com
Buffalo Series
Each model in the Buffalo Series is equipped with a quick
clean burner system. Your burner orifices should be cleaned
every 6 months and this system makes it easy to do so. You
simply disconnect the wiring harness, remove 2 bolts and
your burner will slide out with ease. Once you have cleaned
your burner the apparatus will easily slide back into place
with a little push. Quick and Easy Maintenance.
Quick Kleen Burners
Quick Adjust Air Flow Vents
The Quick Adjust Air Flow vents allow you to adjust the amount of air
that is flowing into the burner chamber. This adjustment allows you to
maximize the efficiency of the burner by fine tuning the CO levels to
optimize emission levels. These vents allow you to adjust your air flow
quickly and simply by loosening 2 bolts and tightening them after
you’ve adjusted the vents accordingly.
Tip Ahead Shroud with Integrated Belt Guard
The tip ahead shroud allows you to easily access all of your motor and
pump components in seconds. You simply loosen the T-Nuts on both
sides of the unit and pull the shroud forward. The belt guard is integrated
into the design of the shroud for maximum serviceability and safety. This
ensures that your belt and pulley system will never be exposed.
Innovative Features
Nema 4 Water Tight Control Panel
Electrical Nema 4 water tight control panels complete with hinged
covers are utilized for easy service access. No unnecessary electronics
are used when designing these units, making service and diagnostics
simple. Available with standard on/off switch or optional auto
start/stop timer shutdown.
HARD WORKING, RELIABLE & EFFICIENT