Burner Manual

8
NG & LPG Heaters • Rev. 4/13/2016
EASY-KLEEN MODULAR WATER HEATERS
INTRODUCTION
Thank you for selecting a quality EASY-KLEEN product. We are pleased to have you included
among the many satisfied owners of an EASY-KLEEN SYSTEM.
Years of engineering have gone into the development of these fine products and only top quality
components and materials are used throughout. Each machine is carefully tested and inspected
before leaving our plant to ensure years of dependable service.
The rest is up to you. To continue to receive satisfactory performance, remember that this
machine represents a substantial investment on your part, but properly cared for and maintained
it will return this investment many times. As with all mechanical equipment, your machine
requires proper installation, proper operation, and maintenance as outlined in this manual.
PLEASE READ THIS MANUAL CAREFULLY BEFORE INSTALLING AND OPERATING
MACHINE. EXAMINE THE MACHINE AND CRATE CAREFULLY FOR SHIPPING
DAMAGE OR MISSING PARTS. REPORT PROMPTLY ANY SHORTAGES OR DAMAGE
CLAIMS TO FREIGHT CARRIER.
Carefully review any additional manuals that have been included with your system and follow
ALL ADDITIONAL OPERATING INSTRUCTIONS. They are specific for the quality
components that have been used to manufacture your machine and are an integral part of the
operating and maintenance procedures.
SCOPE
These instantaneous Coil-type Industrial Water Heaters are designed primarily for use in
conjunction with existing cold water washing systems, either as a field upgrade to a hot water
washer or as integral component of a modular Hot Water system. NOTE: These water heaters
are restricted to industrial use only and are not to be used as portable water heaters.
OPERATING CHARACTERISTICS
MAXIMUM WORKING PRESSURE
The water heater coils are designed to operate safely at specific working pressures (see
SPECIFICATIONS for the water pressure of your model). Each water heater is equipped with a
safety pressure relief valve (unloader) which prevents operation above this pressure. If the high
pressure system requires a lower relieving pressure for pump and motor protection, then the
unloader/bypass valve on the pumping unit should be adjusted to desired pressure rating.