Operation Manual

AFTER SALES SUPPORT
www.aquarius-service.com
GB
IRE
00800 36463600
Cleaning and care
GB
26
IRE
4. Push the small release buttons
4
to release the
shaving foil unit
2
.
5. Pull the shaving foil unit up and off (see fig.K).
6. Wash the shaving foil unit thoroughly under warm
running water on the inside and outside (see fig.G).
7. Place the shaving foil unit on a suitable base.
8. Depress the large release button
8
to open the
shaver head
9
(see fig. A and E).
9. Thoroughly rinse off the top part of the shaver and
the shaver blades
3
under warm running water
(see fig.A and H).
10. Use the electronic On/Off switch
5
to switch the
shaver on with the shaver head open for approx.
5 – 10 seconds to dispel any drops of water from the
shaver blades.
11. Carefully dry the shaving foil unit with a lint-free
cloth or a paper towel.
12. Use a lint-free cloth or a paper towel to thoroughly
dry off the shaver.
13. Close the shaver head and place the shav-
ing foil unit
2
on the shaver head so that the
locking mechanism audibly engages
(see fig. A , F and L).
14. Oil the shaving foils as described in the chapter “User
maintenance for the shaving foils”.
15. Place the protective cap
1
on the shaver.
The shaver is now ready for use again.