User`s manual

User’s Manual

LAX Series DVR

 PTZ

CAMERA: Select a camera number to configure PTZ setting.

DEVICE NAME: Select PTZ controller to configure by using the

DEVICE ID: Set PTZ ID by using the buttons.

FLOW CNTL: Set Flow Control value by using the buttons.

BPS: Set BPS(Bit per second) value of PTZ by using the buttons.

PAR: Set Parity of PTZ by using the buttons.

STOP BIT: Set stop bit of PTZ by using the buttons.

DATA BIT: Set data bit of PTZ by using the buttons.

(Notice!: It is not recommended to change Flow Control, Parity, Stop Bit, Data Bit)

Please refer to PTZ controller manual from PTZ manufacturer to get more information about

PTZ setting.

How to Control PTZ

1. Select camera to control PTZ.

2. Click PTZ button ( ) on the panel menu to open PTZ control menu.

or Press PTZ button ( ) on front key or remote controller.