User`s manual

User’s Manual
23
LAX Series DVR
 Channel
TOTAL FRAME: shows current frame / total max frame when channel configuration is set.
There are two categories to setting channel configuration: COMMON / INDIVIDUAL
[COMMON]: Setting affects all camera channels.
CAMERA: Displays camera number to change settings.
Use buttons to move to the next channel.
AUDIO: Select audio recording condition of all cameras. ( ON / OFF )
(Only 4CH DVR supports this option: 1 CH audio)
RESOLUTION: Select recording resolution of all cameras. ( D1 / Half D1 / CIF )
D1: Max 30fps(NTSC) / 25fps(PAL)
Half D1: Max 60fps(NTSC) / 50fps(PAL)
CIF: Max 120fps(NTSC) / 100fps(PAL)
DE-INTERLACE: Select interlace image process condition of all cameras ( ON / OFF )
[INDIVIDUAL]: Setting affects each camera channels.
FRAME: Configure frame setting for each cameras
(Notice!: Sum of frames cannot exceed max total frame.
Frame cannot exceed value of event frame. )
EVENT FRAME: Configure frame setting for each cameras when event occurs.
(Notice!: Sum of frames cannot exceed max total frame.
QUALITY: Select level of video image quality of all cameras.
Very High, High, Normal, Low, Very Low, Network
(“Network” value get lowest image quality but frequent remote view.)