User`s manual

User’s Manual
18
LAX Series DVR
 OVERVIEW
OVERVIEW menu enables to set the system ID number of the DVR to synchronize the remote
controller, OSD, Auto-Switching, Spot out channel and Button buzzer.
OSD: Select an OSD(On Screen Display) setting whether to show or not. (ON / OFF)
How to setup ID:
1. Select desired ID between. Default ID value is “11”.
2. For Synchronization with remote controller,
on Remote Controller, Press “Cancel” button until power light is on, then press the ID
selected above. (Example: If System ID is “12”, press “Cancel” button until power light is
on and then press “1” and “2”)
AUTO-SWITCHING: Auto-switching interval is a function that allows a camera to move
to next one at the interval set. (From 1 to 30 seconds can be specified.)
e.g.) Camera1 10 sec. Camera2 10 sec. Camera3 …
SPOTOUT CHANNEL: Select a spot out channel.
(Mode: Channel 1/2/3/4 and auto switch screen)
BUTTON BUZZER: Enable buzzer when button is pressed.
LANGUAGE: LANGUAGE: Changes language setting. (Default: English)
Support 15 languages: English, French, Polish, Russian, Spanish, Italian, Portuguese,
Greek, Hungarian, Danish, Czech, Deutch, Finnish, Hebrew and Turkish.