User`s manual

ETZ Series H.264
ETZ _v5.5.0.0 r050810
46
¾ Supported Network: Choose network protocol (TCP/IP or PSTN ).
¾ Port Number: ETZ DVR port number is 9091.
¾ Timeout: Idle time allowed before DVR logs user out of system.
¾ Maximum Users: Max number of users allowed to remotely connect simultaneously to DVR.
5.1 Network Setup
5.2 IP Address Settings
¾ Web Login Required: When checked, remote clients connecting to DVR through a web browser will
be required to enter login and password.
¾ HTTP Port No.: Specify which port to use during remote access. If unsure, leave at Default “80”.
5.3 Web Server
IMPORTANT:
Browser based remote viewing is available on all ETZ
models. Browser based remote view utilizes the ACTIVE X
module to temporary download the browser GUI to remote
client systems. ALL REMOTE CLIENT SYSTEMS MUST
ACCEPT ACTIVE X MODULE IN ORDER TO VIEW.
CHECK ALL INTERNET EXPLORER SETTINGS.
Click this button to bring up “Network Connections”.
Admin user can then input the IP address and other
important networking protocols to configure the
system to be network-able as well as enabling
remote viewing for authorized users.